DynaVap HyperDyn — Flame-Heated Vaporiser

£199.00

DynaVap's big-bowl flame-heated vaporiser in titanium — about 0.25 g a load, seven airflow settings, and a dosing capsule in the box.

Key facts

  • No battery, no charging — heated with a torch or an induction heater
  • Takes dried flower. It does not take oil cartridges, which need a 510 battery.
  • About 0.25 g a load — DynaVap's first "Big Bowl", 2.5 times their standard tip
  • Titanium, seven airflow settings
  • Mouthpiece fits 10 mm and 14 mm water pipes
  • For experienced users — DynaVap recommend a 2- or 3-flame torch

Full description

Who this is for: experienced DynaVap users who want a bigger load per heat — DynaVap describe it as session-style.

The HyperDyn's bowl holds about 0.25 g, 2.5 times DynaVap's standard tip. Its Hyper Cap clicks when hot — a metal disc in the cap snaps at temperature — as on every DynaVap, but the bigger load needs more heat: DynaVap's own write-up gives about 15 seconds and recommends a proper 2- or 3-flame torch. Heating nearer the top of the cap gives a lower temperature, nearer the base a higher one. After the cool-down click, DynaVap say to wait another 30 seconds before touching the cap.

It is titanium, with seven airflow settings set by how far the condenser sits in the mouthpiece, and the mouthpiece fits 10 mm and 14 mm water pipes (pipes that pass the vapour through water to cool it). A Hyper dosing capsule (about 0.125 g) — a small cup you fill in advance and drop into the bowl — is in the box. The Hyper Cap fits only the Hyper Tip; the rest of the HyperDyn works with DynaVap's other mid-sections, tips and mouthpieces.

Next to the UniDyn, the HyperDyn adds a bowl about 2.5 times larger and a dosing capsule. DynaVap suggest the M 7 for casual users.

In the box

  • 1 × Hyper Cap
  • 1 × titanium Hyper Tip
  • 1 × Hyper CCD screen (the mesh that keeps herb in the bowl)
  • High-temperature O-rings (rubber seals)
  • 1 × titanium condenser with mouthpiece
  • 1 × titanium HyperDyn stem
  • 1 × Hyper dosing capsule (about 0.125 g; fill in advance, drop into the bowl)
  • 1 × case

No torch is included.

Specifications

  • Bowl size — about 0.25 g
  • Heating — torch (DynaVap recommend 2 or 3 flames) or induction heater; about 15 seconds
  • Battery — none. No electronics of any kind
  • Materials — titanium
  • Airflow — seven settings
  • Water pipe — 10 mm and 14 mm
  • Size — 10.8 × 1.3 cm
  • Weight — 31 g
  • Temperature indicator — the Hyper Cap clicks

DynaVap's big-bowl flame-heated vaporiser in titanium — about 0.25 g a load, seven airflow settings, and a dosing capsule in the box.

Key facts

  • No battery, no charging — heated with a torch or an induction heater
  • Takes dried flower. It does not take oil cartridges, which need a 510 battery.
  • About 0.25 g a load — DynaVap's first "Big Bowl", 2.5 times their standard tip
  • Titanium, seven airflow settings
  • Mouthpiece fits 10 mm and 14 mm water pipes
  • For experienced users — DynaVap recommend a 2- or 3-flame torch

Full description

Who this is for: experienced DynaVap users who want a bigger load per heat — DynaVap describe it as session-style.

The HyperDyn's bowl holds about 0.25 g, 2.5 times DynaVap's standard tip. Its Hyper Cap clicks when hot — a metal disc in the cap snaps at temperature — as on every DynaVap, but the bigger load needs more heat: DynaVap's own write-up gives about 15 seconds and recommends a proper 2- or 3-flame torch. Heating nearer the top of the cap gives a lower temperature, nearer the base a higher one. After the cool-down click, DynaVap say to wait another 30 seconds before touching the cap.

It is titanium, with seven airflow settings set by how far the condenser sits in the mouthpiece, and the mouthpiece fits 10 mm and 14 mm water pipes (pipes that pass the vapour through water to cool it). A Hyper dosing capsule (about 0.125 g) — a small cup you fill in advance and drop into the bowl — is in the box. The Hyper Cap fits only the Hyper Tip; the rest of the HyperDyn works with DynaVap's other mid-sections, tips and mouthpieces.

Next to the UniDyn, the HyperDyn adds a bowl about 2.5 times larger and a dosing capsule. DynaVap suggest the M 7 for casual users.

In the box

  • 1 × Hyper Cap
  • 1 × titanium Hyper Tip
  • 1 × Hyper CCD screen (the mesh that keeps herb in the bowl)
  • High-temperature O-rings (rubber seals)
  • 1 × titanium condenser with mouthpiece
  • 1 × titanium HyperDyn stem
  • 1 × Hyper dosing capsule (about 0.125 g; fill in advance, drop into the bowl)
  • 1 × case

No torch is included.

Specifications

  • Bowl size — about 0.25 g
  • Heating — torch (DynaVap recommend 2 or 3 flames) or induction heater; about 15 seconds
  • Battery — none. No electronics of any kind
  • Materials — titanium
  • Airflow — seven settings
  • Water pipe — 10 mm and 14 mm
  • Size — 10.8 × 1.3 cm
  • Weight — 31 g
  • Temperature indicator — the Hyper Cap clicks