Flame-heated stainless steel vaporiser from DynaVap, with no battery or electronics.
Key facts:
No battery, no charging — heated with a flame
Stainless steel throughout, few parts to fail
Clicks when it is ready
Works with induction heaters
Nothing electronic to break or replace
Full description: The M7 is DynaVap's stainless steel flame-heated model. Like the rest of the range it uses a cap that clicks when the tip reaches temperature and clicks again as it cools, so timing is by sound rather than by a screen. There is no battery, no charging and no electronics.
In the box:
1 × M 7 ·
1 × DynaVap tin case
1 × DynaTorch (single flame, supplied empty)
Specifications:
Bowl size — 0.1 g
Adjust-a-Bowl — chamber can be reduced by half for microdosing
Heating — any heat source; DynaVap recommend a butane torch or an induction heater
Battery — none. No electronics of any kind
Materials — stainless steel throughout
Tip — finless design, which DynaVap say reduces heat transfer to the stem by up to 20%
Airflow — adjustable, via the airport design and "Pivot" style rocker
Water piece — 10 mm compatible
Temperature indicator — the Captive Cap clicks at the extraction temperature
Parts — Captive Cap · stainless steel M 7 tip · stainless steel CCD screen · 2 × high-temp O-rings · stainless steel M 7 stem · stainless steel condenser · 2 × condenser O-rings
Flame-heated stainless steel vaporiser from DynaVap, with no battery or electronics.
Key facts:
No battery, no charging — heated with a flame
Stainless steel throughout, few parts to fail
Clicks when it is ready
Works with induction heaters
Nothing electronic to break or replace
Full description: The M7 is DynaVap's stainless steel flame-heated model. Like the rest of the range it uses a cap that clicks when the tip reaches temperature and clicks again as it cools, so timing is by sound rather than by a screen. There is no battery, no charging and no electronics.
In the box:
1 × M 7 ·
1 × DynaVap tin case
1 × DynaTorch (single flame, supplied empty)
Specifications:
Bowl size — 0.1 g
Adjust-a-Bowl — chamber can be reduced by half for microdosing
Heating — any heat source; DynaVap recommend a butane torch or an induction heater
Battery — none. No electronics of any kind
Materials — stainless steel throughout
Tip — finless design, which DynaVap say reduces heat transfer to the stem by up to 20%
Airflow — adjustable, via the airport design and "Pivot" style rocker
Water piece — 10 mm compatible
Temperature indicator — the Captive Cap clicks at the extraction temperature
Parts — Captive Cap · stainless steel M 7 tip · stainless steel CCD screen · 2 × high-temp O-rings · stainless steel M 7 stem · stainless steel condenser · 2 × condenser O-rings