DynaVap M7 XL — Flame-Heated Vaporiser

£84.00

Flame-heated stainless-steel dry herb vaporiser from DynaVap — the longer XL version of the M 7, with no battery or electronics.

Key facts

  • No battery, no charging — heated with a flame or an induction heater
  • Takes dried flower. It does not take oil cartridges, which need a 510 battery.
  • All stainless steel
  • Clicks when it is ready
  • Airflow adjustable — six condenser settings
  • This is the M 7 XL — the plain M 7 is a shorter model and a different product

Full description

Who this is for: anyone who wants DynaVap's flame-heated M 7, with a longer path for the vapour to cool.

The M 7 XL has no battery and no electronics. You heat the cap with a torch lighter, or an induction heater (a mains or battery unit that heats the cap without a flame), until it clicks — the cap has a metal disc that snaps when it reaches temperature — then draw, and it clicks again as it cools. DynaVap recommend a butane torch, and the stainless-steel tip takes a little longer to heat than DynaVap's titanium tips.

Which one this is: DynaVap make the M 7 and the M 7 XL. The XL is 109 mm long; DynaVap say the extra length is for handling and gives the vapour a longer path to cool. The bowl is the same 0.1 g on both, and Adjust-a-Bowl halves it. The XL's condenser pushes into the mouthpiece in six positions — the first gives the most draw resistance, deeper gives more airflow and a cooler draw. Its finless tip, DynaVap say, cuts heat transfer to the stem by up to 20%. The mouthpiece fits a 10 mm water pipe (one that passes the vapour through water to cool it; 10 mm is the joint width).

Clean it by soaking the metal parts in isopropyl alcohol or hot soapy water, then rinse — but don't soak the cap. DynaVap say their all-metal devices are dishwasher safe.

In the box

  • 1 × M 7 XL
  • 1 × DynaVap tin case
  • 1 × DynaTorch (single-flame torch lighter), supplied empty — butane is not included

Specifications

  • Bowl size — 0.1 g; Adjust-a-Bowl halves it
  • Heating — any heat source; DynaVap recommend a butane torch or an induction heater
  • Heat-up — not stated by DynaVap
  • Battery — none. No electronics of any kind
  • Materials — stainless-steel tip, stem, condenser and mouthpiece; high-temperature O-rings
  • Airflow — six condenser settings, plus the airport
  • Length — 109 mm
  • Water pipe — 10 mm
  • Temperature indicator — the Captive Cap clicks at temperature
  • Weight — not stated by DynaVap

Flame-heated stainless-steel dry herb vaporiser from DynaVap — the longer XL version of the M 7, with no battery or electronics.

Key facts

  • No battery, no charging — heated with a flame or an induction heater
  • Takes dried flower. It does not take oil cartridges, which need a 510 battery.
  • All stainless steel
  • Clicks when it is ready
  • Airflow adjustable — six condenser settings
  • This is the M 7 XL — the plain M 7 is a shorter model and a different product

Full description

Who this is for: anyone who wants DynaVap's flame-heated M 7, with a longer path for the vapour to cool.

The M 7 XL has no battery and no electronics. You heat the cap with a torch lighter, or an induction heater (a mains or battery unit that heats the cap without a flame), until it clicks — the cap has a metal disc that snaps when it reaches temperature — then draw, and it clicks again as it cools. DynaVap recommend a butane torch, and the stainless-steel tip takes a little longer to heat than DynaVap's titanium tips.

Which one this is: DynaVap make the M 7 and the M 7 XL. The XL is 109 mm long; DynaVap say the extra length is for handling and gives the vapour a longer path to cool. The bowl is the same 0.1 g on both, and Adjust-a-Bowl halves it. The XL's condenser pushes into the mouthpiece in six positions — the first gives the most draw resistance, deeper gives more airflow and a cooler draw. Its finless tip, DynaVap say, cuts heat transfer to the stem by up to 20%. The mouthpiece fits a 10 mm water pipe (one that passes the vapour through water to cool it; 10 mm is the joint width).

Clean it by soaking the metal parts in isopropyl alcohol or hot soapy water, then rinse — but don't soak the cap. DynaVap say their all-metal devices are dishwasher safe.

In the box

  • 1 × M 7 XL
  • 1 × DynaVap tin case
  • 1 × DynaTorch (single-flame torch lighter), supplied empty — butane is not included

Specifications

  • Bowl size — 0.1 g; Adjust-a-Bowl halves it
  • Heating — any heat source; DynaVap recommend a butane torch or an induction heater
  • Heat-up — not stated by DynaVap
  • Battery — none. No electronics of any kind
  • Materials — stainless-steel tip, stem, condenser and mouthpiece; high-temperature O-rings
  • Airflow — six condenser settings, plus the airport
  • Length — 109 mm
  • Water pipe — 10 mm
  • Temperature indicator — the Captive Cap clicks at temperature
  • Weight — not stated by DynaVap