Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10
DynaVap UniDyn — Flame-Heated Vaporiser
DynaVap's ball vape — a flame-heated titanium vaporiser whose cap holds steel balls that store heat, for a convection-style draw.
Key facts
- No battery, no charging — heated with a flame or an induction heater
- Takes dried flower. It does not take oil cartridges, which need a 510 battery.
- Ball cap: about 34 steel balls store the heat and warm the air passing through
- One-piece titanium tip and stem; only two O-rings
- Airflow adjustable — seven condenser settings
- No torch in the box
Full description
Who this is for: DynaVap users who want a smoother, convection-style draw — DynaVap say it is designed for seasoned DynaVap users and ball-vape users.
The UniDyn's BallR Cap holds about 34 stainless-steel balls, 3 mm across, which store heat so that hot air, rather than the hot metal, does more of the heating — DynaVap call this convection-driven. Heat the cap with a torch or an induction heater: heating nearer the "H" line on the cap gives lower temperatures and bold flavour, nearer the "T" line higher temperatures and thicker clouds. It clicks when ready; wait for the cool-down click before heating again. DynaVap say to expect at least 10 seconds of heating, longer than a standard cap, because of the added mass.
The tip and stem are one titanium piece, with a heat break between bowl and stem, and there are only two O-rings to look after. The bowl holds 0.1 g, with Adjust-a-Bowl to halve it; pack it lightly so air can pass. The condenser has seven settings, and the mouthpiece fits a 10 mm water pipe.
Clean the metal parts by soaking in isopropyl alcohol or hot soapy water, then rinse — but don't soak the cap.
Next to the M 7 XL, the UniDyn is titanium rather than stainless steel, has its tip and stem in one piece, and uses the BallR Cap, whose steel balls store heat so hot air does more of the heating; it has seven airflow settings to the M 7 XL's six.
In the box
- 1 × BallR Cap
- 1 × titanium UniDyn tip and stem
- 1 × stainless-steel CCD screen (the mesh that keeps herb in the bowl)
- 1 × titanium condenser with mouthpiece (the part the vapour cools in; sets the airflow)
- 2 × high-temperature O-rings (rubber seals)
No torch is included — you need a torch lighter or an induction heater.
Specifications
- Bowl size — 0.1 g; Adjust-a-Bowl
- Heating — any heat source; DynaVap recommend a butane torch or an induction heater; at least 10 seconds
- Cap — BallR Cap, about 34 stainless-steel balls (3 mm)
- Battery — none. No electronics of any kind
- Materials — titanium tip, stem and condenser; stainless-steel cap and screen
- Airflow — seven condenser settings, plus the airport
- Water pipe — 10 mm
- Temperature indicator — the cap clicks at temperature
- Length — 109 mm (XL length)
- Weight — not stated by DynaVap
DynaVap's ball vape — a flame-heated titanium vaporiser whose cap holds steel balls that store heat, for a convection-style draw.
Key facts
- No battery, no charging — heated with a flame or an induction heater
- Takes dried flower. It does not take oil cartridges, which need a 510 battery.
- Ball cap: about 34 steel balls store the heat and warm the air passing through
- One-piece titanium tip and stem; only two O-rings
- Airflow adjustable — seven condenser settings
- No torch in the box
Full description
Who this is for: DynaVap users who want a smoother, convection-style draw — DynaVap say it is designed for seasoned DynaVap users and ball-vape users.
The UniDyn's BallR Cap holds about 34 stainless-steel balls, 3 mm across, which store heat so that hot air, rather than the hot metal, does more of the heating — DynaVap call this convection-driven. Heat the cap with a torch or an induction heater: heating nearer the "H" line on the cap gives lower temperatures and bold flavour, nearer the "T" line higher temperatures and thicker clouds. It clicks when ready; wait for the cool-down click before heating again. DynaVap say to expect at least 10 seconds of heating, longer than a standard cap, because of the added mass.
The tip and stem are one titanium piece, with a heat break between bowl and stem, and there are only two O-rings to look after. The bowl holds 0.1 g, with Adjust-a-Bowl to halve it; pack it lightly so air can pass. The condenser has seven settings, and the mouthpiece fits a 10 mm water pipe.
Clean the metal parts by soaking in isopropyl alcohol or hot soapy water, then rinse — but don't soak the cap.
Next to the M 7 XL, the UniDyn is titanium rather than stainless steel, has its tip and stem in one piece, and uses the BallR Cap, whose steel balls store heat so hot air does more of the heating; it has seven airflow settings to the M 7 XL's six.
In the box
- 1 × BallR Cap
- 1 × titanium UniDyn tip and stem
- 1 × stainless-steel CCD screen (the mesh that keeps herb in the bowl)
- 1 × titanium condenser with mouthpiece (the part the vapour cools in; sets the airflow)
- 2 × high-temperature O-rings (rubber seals)
No torch is included — you need a torch lighter or an induction heater.
Specifications
- Bowl size — 0.1 g; Adjust-a-Bowl
- Heating — any heat source; DynaVap recommend a butane torch or an induction heater; at least 10 seconds
- Cap — BallR Cap, about 34 stainless-steel balls (3 mm)
- Battery — none. No electronics of any kind
- Materials — titanium tip, stem and condenser; stainless-steel cap and screen
- Airflow — seven condenser settings, plus the airport
- Water pipe — 10 mm
- Temperature indicator — the cap clicks at temperature
- Length — 109 mm (XL length)
- Weight — not stated by DynaVap