DynaVap VonG (i) Titanium — Flame-Heated Vaporiser

£145.00

Flame-heated dry herb vaporiser made in titanium throughout, with a rotating sleeve for airflow and a mouthpiece that fits 10 and 14 mm water pipes.

Key facts

  • No battery, no charging — heated with a flame or an induction heater
  • Takes dried flower. It does not take oil cartridges, which need a 510 battery.
  • Titanium tip, stem, sleeve and condenser
  • Clicks when it is ready — about 5–7 seconds of heating, DynaVap say
  • Airflow set by turning the sleeve
  • Mouthpiece fits 10 mm and 14 mm water pipes

Full description

Who this is for: anyone who wants DynaVap's click-to-ready flame heating in titanium, and the option of a water pipe in either common size.

The VonG (i) has no battery and no electronics. You heat the cap with a torch lighter or an induction heater (a unit that heats the cap without a flame) until it clicks — the cap has a metal disc that snaps at temperature; DynaVap say this takes about 5–7 seconds — then draw, and it clicks again as it cools. The tip, stem, sleeve and condenser are all titanium, and DynaVap say the titanium tip heats faster than stainless steel.

Airflow is set by rotating the sleeve. The bowl can be reduced by half with Adjust-a-Bowl. The mouthpiece has a tapered fitting for 10 mm and 14 mm water pipes (pipes that pass the vapour through water to cool it; the number is the joint width).

Next to the M 7 XL, the VonG (i) adds a titanium build, a rotating-sleeve airflow and the 14 mm fitting.

Clean the metal parts by soaking in isopropyl alcohol or hot soapy water, then rinse — but don't soak the cap.

In the box

  • 1 × Captive Cap
  • 1 × titanium VonG tip
  • 1 × CCD screen (the mesh that keeps herb in the bowl)
  • 1 × titanium VonG (i) stem
  • 1 × titanium sleeve (turn it to set the airflow)
  • 1 × titanium condenser (the part the vapour cools in)
  • O-rings (rubber seals)
  • 1 × user's manual

No torch is included — you need a torch lighter or an induction heater.

Specifications

  • Heating — any heat source; about 5–7 seconds to the click
  • Battery — none. No electronics of any kind
  • Materials — titanium tip, stem, sleeve and condenser
  • Airflow — rotating sleeve
  • Bowl — Adjust-a-Bowl halves it
  • Water pipe — 10 mm and 14 mm
  • Temperature indicator — the Captive Cap clicks at temperature
  • Size — not stated by DynaVap
  • Weight — not stated by DynaVap

Flame-heated dry herb vaporiser made in titanium throughout, with a rotating sleeve for airflow and a mouthpiece that fits 10 and 14 mm water pipes.

Key facts

  • No battery, no charging — heated with a flame or an induction heater
  • Takes dried flower. It does not take oil cartridges, which need a 510 battery.
  • Titanium tip, stem, sleeve and condenser
  • Clicks when it is ready — about 5–7 seconds of heating, DynaVap say
  • Airflow set by turning the sleeve
  • Mouthpiece fits 10 mm and 14 mm water pipes

Full description

Who this is for: anyone who wants DynaVap's click-to-ready flame heating in titanium, and the option of a water pipe in either common size.

The VonG (i) has no battery and no electronics. You heat the cap with a torch lighter or an induction heater (a unit that heats the cap without a flame) until it clicks — the cap has a metal disc that snaps at temperature; DynaVap say this takes about 5–7 seconds — then draw, and it clicks again as it cools. The tip, stem, sleeve and condenser are all titanium, and DynaVap say the titanium tip heats faster than stainless steel.

Airflow is set by rotating the sleeve. The bowl can be reduced by half with Adjust-a-Bowl. The mouthpiece has a tapered fitting for 10 mm and 14 mm water pipes (pipes that pass the vapour through water to cool it; the number is the joint width).

Next to the M 7 XL, the VonG (i) adds a titanium build, a rotating-sleeve airflow and the 14 mm fitting.

Clean the metal parts by soaking in isopropyl alcohol or hot soapy water, then rinse — but don't soak the cap.

In the box

  • 1 × Captive Cap
  • 1 × titanium VonG tip
  • 1 × CCD screen (the mesh that keeps herb in the bowl)
  • 1 × titanium VonG (i) stem
  • 1 × titanium sleeve (turn it to set the airflow)
  • 1 × titanium condenser (the part the vapour cools in)
  • O-rings (rubber seals)
  • 1 × user's manual

No torch is included — you need a torch lighter or an induction heater.

Specifications

  • Heating — any heat source; about 5–7 seconds to the click
  • Battery — none. No electronics of any kind
  • Materials — titanium tip, stem, sleeve and condenser
  • Airflow — rotating sleeve
  • Bowl — Adjust-a-Bowl halves it
  • Water pipe — 10 mm and 14 mm
  • Temperature indicator — the Captive Cap clicks at temperature
  • Size — not stated by DynaVap
  • Weight — not stated by DynaVap