Tinymight 2 — Portable Vaporiser

£299.00

Finnish-made walnut-bodied vaporiser with full convection heating, ready in seconds, used on demand or by the session, with a battery you can change.

Key facts

  • Full convection — hot air passes through the herb; nothing touches a hot plate
  • Takes dried flower. It does not take oil cartridges, which need a 510 battery.
  • Ready in 2–5 seconds, Tinymight say
  • On demand (heats while you hold the button) or session (holds its temperature)
  • Removable 18650 battery included · USB-C
  • Vapour touches only stainless steel and quartz glass, Tinymight say

Full description

Who this is for: anyone who wants fast, full-convection vapour from a small device, and is happy setting the temperature on a dial rather than a screen.

The Tinymight 2 heats by full convection from a 75 W stainless-steel heater: hot air is drawn through the herb, so nothing in the chamber sits on a hot surface. Tinymight give 2–5 seconds to heat. It works two ways — on demand, heating only while you hold the button, or in session mode, holding its temperature. Because it is full convection, Tinymight say draws need to be a bit longer.

Temperature is set on a dial rather than a screen: ten steps with half-steps between, across 120–240 °C, Tinymight say. On the standard setting, level 1 is 140 °C and level 9 is 220 °C, and the whole scale can be shifted up or down. It vibrates when ready. Setting the dial to 0 locks it. Tinymight say the vapour touches only stainless steel and quartz glass, and the body is American walnut and aluminium, built without glue or insulation materials.

The load is adjustable: the cooling unit slides along the glass tube, from very small loads to full ones. The battery is an 18650 cell — a standard rechargeable size — and it can be changed; Tinymight say to use only high-current cells. It charges by USB-C with a 2 A or stronger adapter, taking about an hour and a half to reach 90%.

Clean the glass tube and cooling unit in warm water with detergent or in isopropyl alcohol, taking the O-rings (small rubber seals) out first. Tinymight sell water-pipe adapters (14 mm and 18 mm); none is in the box.

In the box

  • 1 × Tinymight 2 (walnut)
  • 1 × 55 mm glass tube (holds the herb and is the mouthpiece)
  • 1 × cooling unit (slides in the tube to set the load size)
  • 1 × 18650 battery (Molicel high-current)
  • 1 × spare parts kit (O-rings and screens)
  • 1 × USB-C to USB-C cable
  • 1 × carrying pouch
  • 1 × instruction manual

Specifications

  • Heating — full convection; 75 W stainless-steel heater
  • Temperature — 120–240 °C on a ten-step dial with half-steps; standard setting 140 °C (level 1) to 220 °C (level 9); scale can be shifted
  • Modes — on demand and session
  • Heat-up — 2–5 seconds
  • Capacity — up to 0.2 g; adjustable by sliding the cooling unit
  • Ready signal — vibration
  • Vapour path — stainless steel and quartz glass
  • Battery — removable 18650 (high-current cells only)
  • Charging — USB-C, adapter of 2 A or more; about 1½ hours to 90%
  • Run time — not stated by Tinymight
  • Use while charging — not stated by Tinymight
  • Size — 88 × 61 × 37 mm
  • Weight — 186 g (without the tube)
  • Made in — Finland

Finnish-made walnut-bodied vaporiser with full convection heating, ready in seconds, used on demand or by the session, with a battery you can change.

Key facts

  • Full convection — hot air passes through the herb; nothing touches a hot plate
  • Takes dried flower. It does not take oil cartridges, which need a 510 battery.
  • Ready in 2–5 seconds, Tinymight say
  • On demand (heats while you hold the button) or session (holds its temperature)
  • Removable 18650 battery included · USB-C
  • Vapour touches only stainless steel and quartz glass, Tinymight say

Full description

Who this is for: anyone who wants fast, full-convection vapour from a small device, and is happy setting the temperature on a dial rather than a screen.

The Tinymight 2 heats by full convection from a 75 W stainless-steel heater: hot air is drawn through the herb, so nothing in the chamber sits on a hot surface. Tinymight give 2–5 seconds to heat. It works two ways — on demand, heating only while you hold the button, or in session mode, holding its temperature. Because it is full convection, Tinymight say draws need to be a bit longer.

Temperature is set on a dial rather than a screen: ten steps with half-steps between, across 120–240 °C, Tinymight say. On the standard setting, level 1 is 140 °C and level 9 is 220 °C, and the whole scale can be shifted up or down. It vibrates when ready. Setting the dial to 0 locks it. Tinymight say the vapour touches only stainless steel and quartz glass, and the body is American walnut and aluminium, built without glue or insulation materials.

The load is adjustable: the cooling unit slides along the glass tube, from very small loads to full ones. The battery is an 18650 cell — a standard rechargeable size — and it can be changed; Tinymight say to use only high-current cells. It charges by USB-C with a 2 A or stronger adapter, taking about an hour and a half to reach 90%.

Clean the glass tube and cooling unit in warm water with detergent or in isopropyl alcohol, taking the O-rings (small rubber seals) out first. Tinymight sell water-pipe adapters (14 mm and 18 mm); none is in the box.

In the box

  • 1 × Tinymight 2 (walnut)
  • 1 × 55 mm glass tube (holds the herb and is the mouthpiece)
  • 1 × cooling unit (slides in the tube to set the load size)
  • 1 × 18650 battery (Molicel high-current)
  • 1 × spare parts kit (O-rings and screens)
  • 1 × USB-C to USB-C cable
  • 1 × carrying pouch
  • 1 × instruction manual

Specifications

  • Heating — full convection; 75 W stainless-steel heater
  • Temperature — 120–240 °C on a ten-step dial with half-steps; standard setting 140 °C (level 1) to 220 °C (level 9); scale can be shifted
  • Modes — on demand and session
  • Heat-up — 2–5 seconds
  • Capacity — up to 0.2 g; adjustable by sliding the cooling unit
  • Ready signal — vibration
  • Vapour path — stainless steel and quartz glass
  • Battery — removable 18650 (high-current cells only)
  • Charging — USB-C, adapter of 2 A or more; about 1½ hours to 90%
  • Run time — not stated by Tinymight
  • Use while charging — not stated by Tinymight
  • Size — 88 × 61 × 37 mm
  • Weight — 186 g (without the tube)
  • Made in — Finland